manualshive.com logo in svg

Cadillac 2012 Cadillac SRX, Owner'S Manual

The 2012 Cadillac SRX Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides detailed information and instructions on how to operate and maintain your Cadillac SRX. Gain valuable insights into the features and functions of your vehicle by easily accessing the manual through our website.

Share
Download
background image

Black plate (17,1)

Cadillac SRX Owner Manual (Include Mex) - 2012

Driving and Operating

9-17

Adjust the throttle and brake pedals
while the vehicle is in P (Park)
without pressing on the pedals.
The pedals cannot be adjusted
while the vehicle is in R (Reverse)
or when cruise control is engaged.
The throttle and brake pedals can
also be adjusted while driving.

Ignition Positions

The vehicle has an electronic
keyless ignition with pushbutton
start.

Pressing the button cycles it through
three modes, ACC/ACCESSORY,
ON/RUN/START and STOPPING
THE ENGINE/OFF.

If the pushbutton start is not
working, the vehicle may be
near a strong radio antenna
signal causing interference to the
keyless entry system. See

Driver

Information Center (DIC) on
page 5

‑

27

for more information.

To shift out of P (Park), the vehicle
must be in ACC/ACCESSORY or
ON/RUN mode and the brake pedal
must be applied.

STOPPING THE ENGINE/OFF
(No LED Lights):

When the

vehicle is stopped, press the engine
START/STOP button once to turn
the engine off.

If the vehicle is in P (Park), the
ignition will turn off, and Retained
Accessory Power (RAP) will remain
active. See

Retained Accessory

Power (RAP) on page 9

‑

21

for

more information.

If the vehicle is not in P (Park),
the ignition will return to
ACC/ACCESSORY and display
the message SHIFT TO PARK in
the Driver Information Center (DIC).
See

Driver Information Center (DIC)

on page 5

‑

27

for more information.

When the vehicle is shifted into
P (Park), the ignition system will
switch to OFF.

Do not turn the engine off when the
vehicle is moving. This will cause
a loss of power assist in the brake
and steering systems and disable
the airbags.

Summary of Contents for 2012 Cadillac SRX

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Cadillac SRX

Daihatsu F300 Service Manual preview
F300
Brand: Daihatsu Pages: 1718
Daihatsu Mira Manual preview
Mira
Brand: Daihatsu Pages: 340
Pivot DXB-B User Manual preview
DXB-B
Brand: Pivot Pages: 4
Volvo 2004 V70 (Swedish) Användarmanual preview
2004 V70
Brand: Volvo Pages: 188
Camoplast T4S Installation Manuallines preview
T4S
Brand: Camoplast Pages: 19
ECS FIA-030-B Fitting Instructions preview
FIA-030-B
Brand: ECS Pages: 4
Whispbar WB751 Manual preview
WB751
Brand: Whispbar Pages: 15
GYS 029422 Manual preview
029422
Brand: GYS Pages: 32
Volvo 31339699 Installation Instructions, Accessories preview
31339699
Brand: Volvo Pages: 18
Gacell SLH 27C User Manual preview
SLH 27C
Brand: Gacell Pages: 25
Kia 2015 optima Quick Start Manual preview
2015 optima
Brand: Kia Pages: 5
BabySafe Beagle User Manual preview
Beagle
Brand: BabySafe Pages: 43
E-Lead EL-HA1 Manual preview
EL-HA1
Brand: E-Lead Pages: 11
Alfa Romeo Stelvio 2019 User Manual preview
Stelvio 2019
Brand: Alfa Romeo Pages: 268
ULTIMATE SPEED ULG 12 B3 Operation And Safety Notes preview
ULG 12 B3
Brand: ULTIMATE SPEED Pages: 56
Lincoln MKZ HYBRID 2016 Quick Reference Manual preview
MKZ HYBRID 2016
Brand: Lincoln Pages: 10
Westin 23-1970 Instructions preview
23-1970
Brand: Westin Pages: 3
Edelbrock 1465 Installation Instructions preview
1465
Brand: Edelbrock Pages: 1

Brands by name

Popular brands

Load more brands