Cadillac 2012 Cadillac SRX Owner'S Manual Download Page 35

Page: 35 / 512

Black plate (3,1)

Cadillac SRX Owner Manual (Include Mex) - 2012

Keys, Doors, and Windows

2-3

To remove the key, press the button
near the bottom of the transmitter,
and pull the key out. Never pull the
key out without pressing the button.

See your dealer if a new key is
needed.

Contact Roadside Service if locked
out of the vehicle. See

Roadside

Service (U.S. and Canada) on
page 13

‑

Roadside Service

(Mexico) on page 13

‑

With an active OnStar subscription,
an OnStar Advisor may remotely
unlock the vehicle. See

OnStar

Overview on page 14

‑

Remote Keyless
Entry (RKE) System

See

Radio Frequency Statement on

page 13

‑

for information

regarding Part 15 of the Federal
Communications Commission
(FCC) rules and Industry Canada
Standards RSS-GEN/210/220/310.

If there is a decrease in the RKE
operating range:

Check the distance.
The transmitter may be
too far from the vehicle.

Check the location. Other
vehicles or objects may be
blocking the signal.

Check the transmitter's battery.
See

“

Battery Replacement

”

later

in this section.

If the transmitter is still not
working correctly, see your
dealer or a qualified technician
for service.

Remote Keyless Entry
(RKE) System Operation

The Remote Keyless Entry (RKE)
transmitter functions will work up to
60 m (195 ft) away from the vehicle.

Keep in mind that other conditions,
such as those previously stated,
can impact the performance of the
transmitter.

Summary of Contents for 2012 Cadillac SRX

































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Cadillac SRX

Reviews:

Related manuals for 2012 Cadillac SRX

Brands by name

Popular brands

Cadillac 2012 Cadillac SRX, Owner'S Manual

Search results

Summary of Contents for 2012 Cadillac SRX

Reviews:

Related manuals for 2012 Cadillac SRX

Brands by name

Popular brands