Cadillac 2012 Cadillac SRX Owner'S Manual Download Page 300 | Manualshive

Page: 300 / 512

background image

Black plate (22,1)

Cadillac SRX Owner Manual (Include Mex) - 2012

9-22

Driving and Operating

Leaving the Vehicle with the
Engine Running

{

WARNING

It can be dangerous to leave the
vehicle with the engine running.
The vehicle could move suddenly
if the shift lever is not fully in
P (Park) with the parking brake
firmly set. And, if you leave the
vehicle with the engine running,
it could overheat and even catch
fire. You or others could be
injured. Do not leave the vehicle
with the engine running.

If you have to leave the vehicle
with the engine running, be sure
the vehicle is in P (Park) and the
parking brake is firmly set before
you leave it. After you have moved
the shift lever into P (Park), hold
down the regular brake pedal.

See if you can move the shift lever
away from P (Park) without first
pulling it toward you. If you can,
it means that the shift lever was
not fully locked into P (Park).

Torque Lock

Torque lock is when the weight
of the vehicle puts too much
force on the parking pawl in the
transmission. This happens when
parking on a hill and shifting the
transmission into P (Park) is not
done properly and then it is difficult
to shift out of P (Park). To prevent
torque lock, set the parking brake
and then shift into P (Park). To find
out how, see "Shifting Into P (Park)"
listed previously.

If torque lock does occur, your
vehicle may need to be pushed
uphill by another vehicle to relieve
the parking pawl pressure, so you
can shift out of P (Park).

If you are towing a trailer and
parking on a hill, see

Driving

Characteristics and Towing Tips on
page 9

‑

53

.

Shifting out of Park

This vehicle is equipped with an
automatic transmission shift lock
control system. The shift lock
control is designed to prevent
movement of the shift lever out
of P (Park), unless the ignition
is in ON/RUN and the brake
pedal is applied

The shift lock control is always
functional except in the case of an
uncharged or low voltage (less than
9

‐

volt) battery.

If the vehicle has an uncharged
battery or a battery with low voltage,
try charging or jump starting the
battery. See

Jump Starting on

page 10

‑

88

.

To shift out of P (Park):

1. Apply the brake pedal.

2. Turn the ignition to ON/RUN.

3. Press the shift lever button.

4. Move the shift lever to the

desired position.

«
...
298
299
300
301
302
...
»

Summary of Contents for 2012 Cadillac SRX

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Cadillac SRX

Brand: Samsung Pages: 133

Brand: A-Tach Mounts Pages: 2

Brand: A-Tach Mounts Pages: 2

Brand: A-Tach Mounts Pages: 2

Brand: iArmor Pages: 6

Brand: FormFit Pages: 2

Brand: Honda Pages: 208

Brand: Toyota Pages: 371

Brand: Whipple Pages: 3

MCL-7000 Series

Brand: Dakota Digital Pages: 2

Brand: Volvo Pages: 284

BTFREQ PRO BTFMPD3SR

Brand: Scosche Pages: 16

1966 Spider 105

Brand: Alfa Romeo Pages: 46

Brand: Magneti Marelli Pages: 2

Brand: cam Pages: 6

Brand: Tesla Pages: 274

Prime Design VBI-FT31B

Brand: Safe Fleet Pages: 12

Brand: HAKR Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands