manualshive.com logo in svg

Cadillac 2012 Cadillac SRX, Owner'S Manual

The 2012 Cadillac SRX Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides detailed information and instructions on how to operate and maintain your Cadillac SRX. Gain valuable insights into the features and functions of your vehicle by easily accessing the manual through our website.

Share
Download
background image

Black plate (20,1)

Cadillac SRX Owner Manual (Include Mex) - 2012

3-20

Seats and Restraints

3. Be sure that the belt is

not twisted and it lies flat.
The elastic cord must be under
the belt and the guide on top.

{

WARNING

A safety belt that is not properly
worn may not provide the
protection needed in a crash.
The person wearing the belt could
be seriously injured. The shoulder
belt should go over the shoulder
and across the chest. These parts
of the body are best able to take
belt restraining forces.

4. Buckle, position, and release

the safety belt as described
previously in this section. Make
sure the shoulder portion of the
belt is on the shoulder and not
falling off of it. The belt should
be close to, but not contacting,
the neck.

To remove and store the comfort
guide, squeeze the belt edges
together so that the safety belt
can be removed from the guide.
Slide the guide back into its storage
pocket located on the side of
the seat.

Summary of Contents for 2012 Cadillac SRX

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Cadillac SRX

BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
Vauxhall Astra 2021 Owner'S Manual preview
Astra 2021
Brand: Vauxhall Pages: 259
Volvo V70XC Cross country 1998 Owner'S Manual preview
V70XC Cross country 1998
Brand: Volvo Pages: 262
JKS JKSOGS960 Installation Instructions Manual preview
JKSOGS960
Brand: JKS Pages: 6
Mercedes-Benz 240 D 1979 Owner'S Manual preview
240 D 1979
Brand: Mercedes-Benz Pages: 91
Billien OBU 5050 Quick Installation Manual preview
OBU 5050
Brand: Billien Pages: 2
Lexus ES 2021 Quick Manual preview
ES 2021
Brand: Lexus Pages: 28
GYS 029422 Manual preview
029422
Brand: GYS Pages: 32
Porsche 928 GTS 1994 Owner'S Manual preview
928 GTS 1994
Brand: Porsche Pages: 127
Prorack K947 Fitting Instructions Manual preview
K947
Brand: Prorack Pages: 14
Conrad TPMS-001 Operating Instructions Manual preview
TPMS-001
Brand: Conrad Pages: 8
U.S. General 6"OFF ROAD LIGHT 95811 Assembly And Operation Instructions Manual preview
6"OFF ROAD LIGHT 95811
Brand: U.S. General Pages: 7
Malone Stax Pro2 Installation & Loading Instructions preview
Stax Pro2
Brand: Malone Pages: 16
Toyota 2003 COROLLA Repair Manual Supplement preview
2003 COROLLA
Brand: Toyota Pages: 923
Mazda 0000-8G-N03 Installation Instructions preview
0000-8G-N03
Brand: Mazda Pages: 4
Mazda Connect Manual preview
Connect
Brand: Mazda Pages: 196
CITROËN BERLINGO Owner'S Handbook Manual preview
BERLINGO
Brand: CITROËN Pages: 238
CITROËN C4 PICASSO Owner'S Handbook Manual preview
C4 PICASSO
Brand: CITROËN Pages: 352

Brands by name

Popular brands

Load more brands