Cadillac 2009 ESCALADE ESV Owner'S Manual Download

Page: 346 / 602

Vehicle Positioning

At times, the position of the vehicle on the map may be
inaccurate due to one or more of the following reasons:

•

Road system has changed.

•

Vehicle is driving on slippery road surfaces such as
in sand, gravel, and/or snow.

•

Vehicle is traveling on winding roads.

•

Vehicle is on a long straight road.

•

Vehicle is approaching a tall building or a large
vehicle.

•

Surface streets run parallel to a freeway.

•

Vehicle has just been transferred by a vehicle carrier
or a ferry.

•

Current position calibration is set incorrectly.

•

Vehicle is traveling at high speed.

•

Vehicle changes directions more than once, or when
the vehicle is turning on a turn table in a parking lot.

•

Vehicle is entering and/or exiting a parking lot or a
garage.

•

GPS signal is not received.

•

Roof carrier is installed on the vehicle.

•

Vehicle is being driven with tire chains.

•

Tires are replaced.

•

Tire pressure for the tires is incorrect.

•

Tires are worn.

•

First time the map DVD is inserted.

•

Battery is disconnected for several days.

•

Vehicle is driving in heavy traffic where driving is at
low speeds, and the vehicle is stopped and started
repeatedly.

See your dealer/retailer if other problems occur.

4-60

Summary of Contents for 2009 ESCALADE ESV



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 ESCALADE ESV

Reviews:

Related manuals for 2009 ESCALADE ESV

Brands by name

Popular brands

Cadillac 2009 ESCALADE ESV, Owner'S Manual

Search results

Summary of Contents for 2009 ESCALADE ESV

Reviews:

Related manuals for 2009 ESCALADE ESV

Brands by name

Popular brands