Cadillac 2009 ESCALADE ESV Owner'S Manual Download Page 127 | Manualshive

Page: 127 / 602

background image

Ignition Positions

The ignition switch has
four different positions.

To shift out of P (Park), the ignition must be in ON/RUN
or ACC/ACCESSORY and the regular brake pedal must
be applied.

A (LOCK/OFF): This position locks the ignition. It may
also lock the steering wheel and automatic transmission.
The key can be removed in LOCK/OFF.

On vehicles with an automatic transmission, the shift
lever must be in P (Park) to turn the ignition switch to
LOCK/OFF.

The steering may bind with the wheels turned off center.
If this happens, move the steering wheel from right
to left while turning the key to ACC/ACCESSORY.
If this doesn’t work, then the vehicle needs service.

Notice: Using a tool to force the key to turn in the
ignition could cause damage to the switch or break
the key. Use the correct key, make sure it is all the
way in, and turn it only with your hand. If the key
cannot be turned by hand, see your dealer/retailer.

B (ACC/ACCESSORY): This position lets things like the
radio and the windshield wipers operate while the
engine is off. Use this position if the vehicle must be
pushed or towed.

C (ON/RUN): This position can be used to operate the
electrical accessories and to display some instrument
panel cluster warning and indicator lights. The switch
stays in this position when the engine is running.
The transmission is also unlocked in this position
on automatic transmission vehicles.

If you leave the key in the ACC/ACCESSORY or ON/
RUN position with the engine off, the battery could be
drained. You may not be able to start the vehicle if the
battery is allowed to drain for an extended period of time.

D (START): This is the position that starts the engine.
When the engine starts, release the key. The ignition
switch returns to ON/RUN for driving.

A warning tone will sound when the driver door is
opened, the ignition is in ACC/ACCESSORY or
LOCK/OFF and the key is in the ignition.

2-25

«
...
125
126
127
128
129
...
»

Summary of Contents for 2009 ESCALADE ESV



























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 ESCALADE ESV

Brand: GMC Pages: 425

Brand: Trailboss Pages: 5

PRIME DESIGN VRR-E-PM21

Brand: Safe Fleet Pages: 12

Brand: Veigel Pages: 24

Brand: Cellular Line Pages: 25

Brand: SuperATV Pages: 7

Brand: Thule Pages: 8

Brand: Axxess Pages: 8

Brand: Dodge Pages: 276

GMC Yukon Denali 2005

Brand: Cadillac Pages: 456

Brand: Saab Pages: 63

Brand: R&G Pages: 20

Brand: Whispbar Pages: 70

Brand: Ford Pages: 458

Brand: Webasto Pages: 23

Brand: Westin Pages: 3

Brand: Mazda Pages: 605

Brand: KAP Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands