Cadillac 2009 ESCALADE ESV Owner'S Manual Download | Manualshive

Page: 146 / 602

background image

When the System Does Not Seem to
Work Properly

If the URPA system will not activate due to a temporary
condition, the message PARK ASSIST OFF will be
displayed on the DIC and a red light will be shown on
the rear URPA display when the shift lever is moved into
R (Reverse). This occurs under the following conditions:

•

The driver disables the system.

•

The ultrasonic sensors are not clean. Keep the
vehicle’s rear bumper free of mud, dirt, snow,
ice and slush. For cleaning instructions, see
Washing Your Vehicle on page 6-100.

•

A trailer was attached to the vehicle, or a bicycle or
an object was hanging out of the liftgate during the
last drive cycle, the red light may illuminate in the
rear display. Once the attached object is removed,
URPA will return to normal operation.

•

A tow bar is attached to the vehicle.

•

The vehicle’s bumper is damaged. Take the vehicle
to your dealer/retailer to repair the system.

•

Other conditions may affect system performance,
such as vibrations from a jackhammer or the
compression of air brakes on a very large truck.

If the system is still disabled, after driving forward at least
15 mph (25 km/h), take the vehicle to your dealer/retailer.

Side Blind Zone Alert (SBZA)

The vehicle may have a Side Blind Zone Alert (SBZA)
system. Read this entire section before using the system.

The SBZA system operates on a radio frequency
subject to Federal Communications Commission (FCC)
Rules and with Industry Canada.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired
operation.

This device complies with RSS-310 of Industry Canada.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired
operation.

Frequency of operation: 24.05GHz – 24.25GHz

Field Strength: Not greater than 2.5V/m peak (0.25V/m
average) at a distance of 3m

2-44

«
...
144
145
146
147
148
...
»

Summary of Contents for 2009 ESCALADE ESV



























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 ESCALADE ESV

Brand: BrandMotion Pages: 8

Brand: Mazda Pages: 720

Brand: GMC Pages: 120

Brand: Prime Tech Pages: 6

Brand: Fiat Pages: 24

Brand: Valeo Pages: 28

Brand: Ford Pages: 256

Brand: Simplicity Pages: 10

JEEP GL ADIATOR JT TOPPER ROOF RACK

Brand: JCROffroad Pages: 7

IVH-9000-2R440Q

Brand: Vecow Pages: 110

Brand: Prorack Pages: 10

Brand: Carcomm Pages: 2

Brand: Subaru Pages: 32

Brand: INDIWORK Pages: 18

Brand: Opel Pages: 103

Brand: Pogo Pages: 40

Brand: Honda Pages: 5

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands