Cadillac 2009 ESCALADE ESV Owner'S Manual Download | Manualshive

Page: 166 / 602

background image

Luggage Carrier

For vehicles with a luggage carrier, items can be loaded
on top of the vehicle.

The luggage carrier has siderails attached to the roof and
crossrails, if equipped, which can be moved back and
forth to help secure cargo. To adjust them, turn the knob
located at each end of the crossrail counterclockwise until
the crossrail can move freely. To secure the crossrail,
turn the knob located at each end of the crossrail
clockwise until tightened. Tie the load to the siderails or
siderail supports.

Notice: Loading cargo on the luggage carrier that
weighs more than 200 lbs (91 kg) or hangs over the
rear or sides of the vehicle can damage the vehicle.
Load cargo so that it rests as far forward as possible
and against the side rails, making sure to fasten it
securely.

Do not exceed the maximum vehicle capacity when
loading the vehicle. For more information on vehicle
capacity and loading, see Loading the Vehicle on
page 5-33.

To prevent damage or loss of cargo, check now and
then to make sure the luggage and cargo are still
securely fastened.

Be sure the cargo is properly loaded.

•

If small heavy objects are placed on the roof, place
the load in the area over the rear wheels (behind the
rear side door on extended models). If needed, cut a
piece of 3/8 inch plywood to fit inside the crossrails
and siderails to spread the load. If plywood is used,
tie it to the siderail supports.

•

Tie the load to the crossrails or the siderail supports.
Use the crossrails only to keep the load from sliding.
To move the crossrails, pull out on the latch release
handle at each end. Slide the crossrail to the desired
position balancing the force side to side. Push the
release handle back into the latched position and
slide the crossrail back and forth slightly to be sure
the latch snaps securely into place.

•

If needed to carry long items, move the crossrails as
far apart as they will go. Tie the load to the crossrails
and the siderails or siderail supports. Also tie the
load to the bumpers. Do not tie the load so tightly
that the crossrails or siderails are damaged.

•

After moving a crossrail, be sure it is securely locked
into the siderail.

A Center High-Mounted Stoplamp (CHMSL) is located
above the glass or above the rear load doors.

If items are loaded on the roof of the vehicle, care
should be taken not to block or damage the CHMSL unit.

2-64

«
...
164
165
166
167
168
...
»

Summary of Contents for 2009 ESCALADE ESV



























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 ESCALADE ESV

Brand: RAM Pages: 20

Brand: Porsche Pages: 51

Brand: Whispbar Pages: 14

Brand: AMP Research Pages: 12

Half Size Trunk Box Organizer C-TBO-CV

Brand: Havis-Shields Pages: 1

Brand: Volvo Pages: 8

Brand: Audi Pages: 9

Brand: Belkin Pages: 4

Brand: WABCO Pages: 48

Brand: Raytel LLC Pages: 40

Brand: TATA Motors Pages: 159

adaptiv mini ADVM-BM1

Brand: Connects2 Pages: 4

Brand: STO N SHO Pages: 7

Brand: SuperATV Pages: 7

Brand: CTEK Pages: 84

Brand: Vauxhall Pages: 259

HU-4421-XL-SDK01

Brand: FALCON RIDGE Pages: 5

Brand: v.link Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands