5.
Install a new backup battery and make sure that the battery is inserted properly. If
the ribbon cable was removed, replace the cable.
6.
Replace the upper cover (make sure the front edge of the top cover is properly
inserted into the notches in the plastic cups) for the C7000, and re-install the
screws to secure the cover.
IEC320 Power Cord
The C7000 and C7000ER analyzers use a standard IEC320 power connector, allowing
you to obtain suitable power cords for connection to any standard line voltage source. If
you need a special power cord for your particular wall socket, obtain an approved cord
fitted with an IEC320 socket at one end, and the appropriate local fitting at the other
end.
If you obtain a universal IEC320 power cord with a socket but no plug, you should
connect the appropriate plug as follows:
•
Brown = Line (AC Hot)
•
Blue = Neutral (AC Neutral)
•
Green or Green/Yellow = Ground (Earth)
Blue
Ground (Earth)
Green or
Green/Yellow
Brown
IEC320 Socket
(connects to Battery Analyzer)
Line (AC Hot)
Neutral
72
C7000 & 7000ER Battery Analyzer V3.5
Warning: Make sure this is conducted by a licensed electrician.
