ATENA - DUKE - SABA - MITHOS
22
Fig. 56 - Fixing 1
Fig. 57 - Fixing 2
• Tighten the screws to the stone (see
Fig. 58
), the screw head must protrude about 1.5 mm (see
Fig. 59
).
Fig. 58 - Tighten the screws
Fig. 59 - The screw must protrude
• Take the stone and fit the screw head in the appropriate hole in the brackets (see
Fig. 60
and
Fig. 61
).
• Proceed in the same way for all the stones (see
Fig. 62
).
• Follow the procedure in reverse order to remove.
Fig. 60 - Hook the stone
Fig. 61 - Detail of the hooking
Fig. 62 - Hook all the stones
• To finish off, position the bottom stone by inserting the finish profile on the top, screwing it on the side flaps as per point 1
Fig.
63
Fig. 64
.
