ATENA - DUKE - SABA - MITHOS
18
Fig. 31 - Release the panel
6.9
REMOVAL/ASSEMBLY OF METAL PROFILES (ATENA
3
PLUS 12/14)
To disassemble the front profiles, proceed as follows:
• Remove the cast iron cover (see dedicated chapter).
• Release both front panels (see
Fig. 32
).
• Undo the front screws of the profile (see
Fig. 33
and
Fig. 34
).
Fig. 32 - Remove the front panels
Fig. 33 - Remove the screws
Fig. 34 - Remove the screws
• Open the side and release the panel (see
Fig. 35
).
• To assemble proceed in reverse order.
Fig. 35 - Release the panel
6.10 TILES ASSEMBLY (ATENA
3
PLUS 12/14)
To disassemble the tiles, proceed as follows:
• Place the tiles on a worktop and set the tile support above it.
