ATENA - DUKE - SABA - MITHOS
15
Fig. 18 - General dimensions: Mithos Plus 12/14 PS
LEGEND
Fig. 18
A
Exhaust fumes d.8 cm
B
Hole combustion air inlet d.6 cm
C
Ducting outlet d.8 cm
6.4
STOVE DOOR REMOVAL/INSTALLATION
DOOR REMOVAL
For some operations (e.g.: side panel assembly and cleaning) you must remove the stove door.
To remove the door:
• Open the door.
• Use a screwdriver to rotate the lever in the direction of the arrow (vedi
Fig. 19
).
• Lift the door to allow the door pivots to slide out of the structure bracket (see
Fig. 20
).
• Keep the door in a safe place until next use.
Fig. 19 - Remove screws
Fig. 20 - Door removal
DOOR ASSEMBLY
To assemble the door you must centre the pivots fixed to the door, on the structure bracket.
After having mounted the door with the screwdriver, lift the lever so that the door is locked.
6.5
REMOVAL OF CAST IRON COVER AND CAPS (ATENA
3
PLUS 12/14 - DUKE 12/14 AIRTIGHT)
ATTENTION: it takes 2 persons to lift the cover.
To remove the cast-iron cover, proceed as follows:
