ATENA - DUKE - SABA - MITHOS
27
Fig. 87 - Upper hot air outlet (right or left)
Fig. 88 - Rear hot air outlet (right or left)
• Position the pipes as described in
SOLUTION A
and
SOLUTION B
.
6.18 HOT AIR DUCTING (MITHOS3 PLUS 12/14)
Fig. 89 - Hot air outlet (default)
The stove is fitted with 2 hot air outlets and by default they are oriented in the 2 front outlets (see
Fig. 89
).
These 2 outlets can be oriented differently: up and/or side and/or rear.
To change the direction, proceed as follows:
SIDE DUCTING (RIGHT AND/OR LEFT)
• Remove the side panel (see
REMOVAL OF SIDE PANELS (MITHOS3 PLUS 12/14) a pag. 23
).
• Fold the tabs inwards (see
Fig. 90
).
• Remove the clamp and detach the hose from the vent of the grid (see
Fig. 91
).
• Rotate the hose towards the groove for the side outlet (see
Fig. 92
).
