Cadel MITHOS PLUS 12 PS Installer Manual Download Page 37

Page: 37 / 44

ATENA - DUKE - SABA - MITHOS

In case of doubts regarding the use of the stove, please contact ALWAYS the Authorized Technician on order to

avoi irreparable damages!

PROBLEM

CAUSE

SOLUTION

INTERVENTION

The control display

does not switch on

The stove is without

power supply

Check if the plug is connected.

Burned protection

fuse in the electric

socket

Replace the protection fuses in the electric socket (3.15A-250V).

Faulty control

display

Replace the control display.

Faulty flat cable

Replace the flat cable.

Faulty electronic

board

Replace the mother board.

Pellets do not reach

the combustion

chamber

Empty hopper

Full the hopper.

Open fire door or

open pellet door

Close fire door and pellet door and check that there are no pellet

grains at the gasket level.

Clogged stove

Fume chamber cleaning

Auger blocked by a

foreign object (for

example nails)

Clean the auger.

The auger geared

motor is out of order Replace the geared motor.

Check if on the

display there is an

"ACTIVE ALARM"

Have the stove checked.

Summary of Contents for MITHOS PLUS 12 PS













































Search results

Summary of Contents for MITHOS PLUS 12 PS

Reviews:

Related manuals for MITHOS PLUS 12 PS

Brands by name

Popular brands

Cadel MITHOS PLUS 12 PS, Installer Manual

Search results

Summary of Contents for MITHOS PLUS 12 PS

Reviews:

Related manuals for MITHOS PLUS 12 PS

Brands by name

Popular brands