ATENA - DUKE - SABA - MITHOS
24
• Position the pipe as shown in
Fig. 67
.
UPPER EXHAUST
Fig. 68 - Remove the cap (Saba 14)
Fig. 69 - Remove the cap (Atena
3
Plus 12/14 -
Duke At)
Fig. 70 - Connect the Tee fitting
• Remove the cap at the back of the cover (see
Fig. 68
or
Fig. 69
).
• Connect a Tee fitting as shown in
Fig. 70
.
Fig. 71 - Lower the support
Fig. 72 - Connect the pipes
Fig. 73 - Rear fume exhaust mounted
• Bend the support at the back of the stove and insert the fume exhaust pipe (see
Fig. 71
).
• Connect the 2 pipes (see
Fig. 72
and secure it all with the clamp (see
Fig. 73
).
6.16 CONCENTRIC PIPE-KIT ASSEMBLY (ATENA PLUS 12/14 - DUKE 12/14 AIRTIGHT - SABA 12/14)
The stove is designed to be connected to a concentric pipe by means of a dedicated kit.
The upper exhaust with concentric pipe requires 1 kit code 5020004 (optional).
To assemble the kit, proceed as follows:
• Take the kit (see
Fig. 74
) and couple the pipe to the outlet of the fume exhaust of the stove (see
Fig. 75
).
• Insert the flexible pipe into the combustion air inlet pipe of the stove (see
Fig. 76
).
