INSTALLING THE TPT
3-8
3.3.4
Providing Strain Relief for the TPT
We recommend that you support the cabling attached to
the TPT-4 to relieve the stress on the connections. To
support the UTP segment and AUI cable:
1.
Mark the location where you want to place the
mounting bases for the cable ties. To provide
maximum strain relief to the cables, support should be
provided about 4" from the TPT-4’s RJ-45 port, and if
necessary, near the end of the built-in AUI cable
extending from the TPT-4.
2.
Peel off the paper that covers the adhesive backing of
each plastic mounting base.
3.
Firmly press each mounting base into the marked
positions.
4.
Thread a cable tie through one set of slots on each
mounting base.
5.
Once you have attached all cabling to the TPT-4, as
described in the preceding sections, tie off the cables.
Summary of Contents for TPT
Page 2: ......
