INTRODUCTION
1-2
Chapter 3,
Installing the TPT
,
contains steps for
unpacking the TPT, setting the SQE switch, connecting the
transceiver to the network, and connecting the transceiver
to an Ethernet device.
Chapter 4,
Testing and Troubleshooting
,
contains
procedures for verifying that the TPT is operational. It also
describes the LANVIEW™ LEDs, and how you can use
them to troubleshoot network problems.
Before you install the TPT, you should have a general
working knowledge of Ethernet or IEEE 802.3 type data
communications networks and their physical layer
components.
1.2
GETTING HELP
If you need additional support concerning Cabletron
Systems TPT, or if you have comments, questions, or
suggestions concerning this manual, feel free to contact
Cabletron Systems’ Technical Support at:
Cabletron Systems
35 Industrial Way
P.O. Box 5005
Rochester, NH 03867-5005
Phone: (603) 332-9400
Summary of Contents for TPT
Page 2: ......
