Cabletron Systems MICRO-CS, Installation Manual

Page: 85 / 93

Installation Procedure
Micro-CS Installation Guide D-3
D.4 INSTALLATION PROCEDURE
Please read all the installation instructions prior to performing the install
to determine the correct steps for your configuration. Since the
MicroMMAC can be configured with 24 ports, 2 EPIMs and a BRIM,
some components may have to be removed in order to facilitate
installation of the Micro-CS.
!
CAUTION
Observe all antistatic precautions when handling electronic
components.
Table 4-2 Micro-CS Upgrade Kit Contents
Item Qty. Description/Part No.
1 1 Micro-CS / 8910394
2 1 Wrist Strap / (part of 8910394)
3 1 Overlay Label / (part of 8910394)
4 4 1” Stand off (only 2 needed) / 8020076
5 1 6 inch cable / 9360171-6”
6 1 EPIM-3PS and manual
7 1 Micro-CS User’s Guide (this manual) / 9031431
8 4 Screw, 6-32x5/16” (only 2 needed)
9 4 Washer, flat #6 (only 2 needed)
10 1 FCC Compliance Label