CBU-NM
User Manual
ii
80-60100000-02
7–8
setting. For the TTY, ANSI and VT-52 emulations, this is 0
(Black). For the VT-100 emulation, it is 15 (White).
The colour values are interpreted as follows:
0
Black
8
Dark grey
1
Dark blue
9
Blue
2
Dark green
10 Green
3
Dark cyan
11 Cyan
4
Dark red
12 Red
5
Dark magenta
13 Magenta
6
Dark yellow
14 Yellow
7
Light grey
15 White
7.9.7 BackgroundColour=<integer>
Default:
-1
Purpose:
Controls the background colour used by the Auxiliary
Terminal. The value of each entry can be -1 or a value
between 0 and 15.
The value of -1 causes the Cabletron Network Controller to
choose a default colour that depends on the Emulation
setting. For the TTY, ANSI and VT-52 emulations, this is 15
(White). For the VT-100 emulation, it is 0 (Black).
The colour values correspond to the same colours as for the
ForegroundColour entry.
7.9.8 TranslateBackspace=<boolean>
Default:
Off
Purpose:
Makes the keys Del and Backspace produce the same Hex
code (7F) if you are using the VT-100 terminal emulation.
Valid entries are On or Off.
7.10 [Remote Link]
This section contains only two entries, Port and RxQueueSize. These
are identical in form to the entries in the Control and Auxiliary Link
sections, but apply to devices on the Remote port. Again, you need to
specify a port name that is not being used by another Link.
