CBU-NM
User Manual
ii
80-60100000-02
4–6
4.5.3.1 Editing the Talkwire List
To examine or modify the Talkwire List, use the
Talkwire List...
command from the Network menu or from the Speed Menu in the
Network Inspector or Control Terminal window.
A dialogue box appears, which allows you to select the KBU 64 channels
that the Cabletron Network Controller will use to make direct connections
to remote devices.
The dialogue box displays two lists of Talkwire Units.
1.
On the right hand side, a list labelled
Available KBUs shows all the
channels of all the local KBUs known to the Cabletron Network
Controller.
2.
On the left hand side, a list labelled
KBUs used for talkwire calls
shows the current contents of the Talkwire List.
To add KBU channels to the Talkwire List, select them in the
Available
KBUs list by clicking on them, and then press the Add button (located
between the two lists). They will now appear in the
KBUs used for
talkwire calls list.
To help with selecting the KBU channels, you can use the two buttons
beneath the
Available KBUs list. Select All selects all of the entries;
Clear All deselects all of the entries.
To remove one or more units from the Talkwire List, first select them in
the
KBUs used for talkwire calls list by clicking on them. Then press
the
Delete button (located below the KBUs used for talkwire calls list).
To empty the Talkwire List completely, press the
Clear All button located
below the
KBUs used for talkwire calls list.
Note that when you remove a Talkwire Unit from the Talkwire List, it
remains in the Network Inspector window, but its Location field changes
to show it as a local device.
When you have changed the details, press
OK or Enter to update the
Talkwire List.
If you do not wish to save the changes, press
Cancel or Esc.
