Cabletron Systems 6H123-50, User Manual

Page: 84 / 204

Chapter 5: Local Management
5-34 6H123-50 and 6H133-37 User’s Guide
Source Module [ n] (Selectable)
Used to select a module [n] as a source module.
Source Port [
n] (Selectable)
Used to select a port [n] as a source port.
Destination Module [ n] (Selectable)
Used to select a module [n] as a destination module.
Destination Port [ n] (Selectable)
Used to selected a port [n] as a destination port.
Errors (Toggle)
Used to configure the selected source port to either send errored frames to
a selected destination port (ON option), or to drop errored frames, and
send only valid traffic to the destination port (OFF option). The default
option is ON.
Status (Toggle)
Used to add or delete source/destination ports selected in the
Source/Destination Ports fields.
5.11.1 Displaying the Source and Destination Entries
There can be more than one Port Redirect Function screen depending on
the number of port redirect entries. Each screen displays up to ten port
redirect entries. If there is more than one screen of redirect entries, the
NEXT and/or PREVIOUS command displays at the bottom of the screen,
allowing the user to navigate to the next or previous screen.
For example, with three screens of entries, the NEXT command displays
at the bottom of the first screen. In the second screen, the NEXT and
PREVIOUS commands display. In the last screen, only the PREVIOUS
command displays.
To display the next screen, use the arrow keys to highlight NEXT. Press
ENTER and the next screen of entries displays.
To display the previous screen, use the arrow keys to highlight
PREVIOUS. Press ENTER to view the entries in the previous screen.