Module Level Security Configuration
6H123-50 and 6H133-37 User’s Guide
5-99
5.28.1
Setting the Module Level Security
To set module security for each connector, proceed as follows:
1.
Use the arrow keys to highlight the SECURITY STATE field for the
connector.
2.
Use the SPACE bar to step to the appropriate security level.
3.
If the security level chosen causes the DisablePort and SendTrap
fields to display under Action On Intruder, use the arrow keys to
highlight the DisablePort field. If the security level chosen does not
cause the fields to display under Action On Intruder, proceed to step 7.
4.
To change the DisablePort setting to NoDisable, press the SPACE
bar to toggle the setting.
5.
Use the arrow keys to highlight the SendTrap field.
6.
To change the SendTrap setting to NoTrap, press the SPACE bar to
toggle the setting.
7.
To change the security on more than one connector, repeat steps 1
through 6 for each connector. Then proceed to step 8 to save all
settings at once.
8.
Use the arrow keys to highlight the SAVE command.
9.
Press ENTER. The message “SAVED OK” displays and all ports of
the connector are set to the selected operating mode.
Summary of Contents for 6H123-50
