Cabletron Systems 6H123-50, User Manual

Page: 51 / 204

6H123-50 and 6H133-37 User’s Guide 5-1
CHAPTER 5
LOCAL MANAGEMENT
This chapter explains setting up a management terminal to access
6H123-50 and 6H133-37 Local Management. It also explains using the
Local Management screens and commands.
5.1 OVERVIEW
Local Management for the 6H123-50 and 6H133-37 consists of a series
of management screens that enable the management of the module, the
attached segments and the 6C105 chassis. The management screens
enable the user to do the following tasks:
• Manage any interface module in the chassis via a connection to a
single interface module.
• Assign IP addresses and subnet masks to the 6H123-50, 6H133-37 and
the 6C105 chassis.
• Control access to the 6H123-50, 6H133-37 and the 6C105 chassis by
establishing community names.
• Download a new image of operating software.
• Designate which Network Management Workstations receive SNMP
traps from the 6H123-50, 6H133-37 and the 6C105 chassis.
• Monitor the environmental status of the 6C105 chassis.
• View bridge and port statistics.
• Enable port Trunking to perform load sharing.
• Configure the Fast Ethernet Interface Modules for the 6H123-50 and
the HSIM for the 6H133-37.
NOTE
The Local Management screens shown in this chapter are for
the 6H123-50. The 6H133-37 shares most of the following
Local Management screens. All Local Management functions
specific to any one interface module are preceded by a Note to
alert the reader.