Cabletron Systems 6E122-26, User Manual

Page: 129 / 184

Flash Download Screen
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide 5-81
Reboot After Download (Modifiable when RUNTIME is chosen only)
This field notifies the user that the 6E12X-26 and 6E13X-25 will reboot
after the download is complete. If a RUNTIME Download is performed,
this field toggles between YES and NO. If YES is selected, the module
reboots after the download is completed. If NO is selected the module
continues using the existing the firmware image. The module stores the
new firmware image in FLASH memory. When the module or 6C105
chassis is reset, the module will boot from FLASH memory using the new
image.
TFTP Gateway IP Addr (Selectable)
This field shows the IP address of the TFTP gateway server defined in the
General Configuration screen in
Section 5.15.4 , Setting the TFTP
Gateway IP Address .
Last Image Server IP (Read-only)
This field shows the IP address of the server used for the previous FLASH
Download.
Last Image File Name (Read-only)
This field shows the complete path and file name of the last image
downloaded to FLASH.
If TFTP or RUNTIME is selected as the download method
(
Figure 5-29 ), the following two additional fields appear:
Download Server IP (Selectable)
The IP address of the TFTP server to be used for the FLASH download is
entered in this field.
Download File Name (Selectable)
The complete TFTP Server path and file name of the new image is entered
in this field.