Cabletron Systems 6E122-26, User Manual

Page: 114 / 184

Chapter 5: Local Management
5-66 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide
5.19 ETHERNET FULL DUPLEX CONFIGURATION
SCREEN
The Ethernet Full Duplex Configuration screen, Figure 5-25 , allows the
user to set ports 1 through 24 for either Standard Ethernet or Full Duplex
operation and monitor each port to see whether or not it is enabled and
linked to another device.
Access the Ethernet Full Duplex Configuration screen from the Module
Specific Configuration Menu screen by using the arrow keys to highlight
the ETHERNET FULL DUPLEX CONFIGURATION menu item in
the Module Specific Configuration Menu screen and press ENTER. The
Ethernet Full Duplex Configuration screen,
Figure 5-25 , displays.
Figure 5-25 Ethernet Full Duplex Configuration Screen
Firmware Revision: XX.XX.XX
Full Duplex Configuration
1960_21
BOOTPROM Revision: XX.XX.XX
PORT #
1
2
3
4
5
6
7
8
9
10
11
12
LINK STATUS
Link
Link
Link
No Link
Link
Link
Link
Link
Link
Link
Link
Link
Module Type: 6E122-26
Slot Number: X
6E122-26 LOCAL MANAGEMENT
Event Message Line
SAVE
OPERATION MODE
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
PORT STATUS
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
SET ALL PORTS: [FULL ]
RETURN
RETURN
[13-24]
EXIT