Chapter 5: Local Management
5-54
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide
Figure 5-20
COM Port Warning Screen
3.
Use the arrow keys to highlight YES. Press ENTER.
4.
If you ENABLED the port, proceed to
Section 5.15.12
. If you
DISABLED the port, use the arrow keys to highlight SAVE at the
bottom of the screen, then press ENTER. When the message “SAVED
OK” displays, the edits are saved.
NOTE
If the 6C105 chassis has been configured with a valid IP
address this screen will not appear. When the chassis is
assigned a valid IP address all the interface modules installed
share this same address.
!
CAUTION
Exiting without saving causes the message “NOT SAVED --
PRESS SAVE TO KEEP CHANGES” to appear. Exiting without
saving causes all edits to be lost.
WARNING
174252
THE COM PORT HAS BEEN RECONFIGURED AND THERE IS NO IP
ADDRESS SET FOR THIS DEVICE. YOU WILL NO LONGER BE ABLE
TO MANAGE THIS BOARD. DO YOU STILL WISH TO RECONFIGURE
THIS COM PORT?
YES
NO
Summary of Contents for 6E122-26
