58
Serviceanleitung / Service Manual
/
/
/
6.
Pull the mains input plug (8) and the Power Cable
plug (9) out of the power supply PCB (10).
7.
Remove the two screws M4x6 (7) from the cooling
plate and remove the power supply (10).
8.
To fit the new power supply follow the above steps in
the reverse order.
6.
Ziehen Sie den Stecker (8) des Netzeingangs und
den Stecker (9) der Leitung Netzteil von der Leiter-
platte (10).
7.
Entfernen Sie zwei Schrauben M4x6 (7) aus dem
Kühlblech und entnehmen Sie das Netzteil (10).
8.
Bauen Sie das neue Netzteil in umgekehrter Reihen-
folge wieder ein.
Bild 39
Wechseln des Netzteils II
Fig. 39
Replacing the Power Supply II
7
9
8
10
7