BYD BYD5030XXYBEV2 Manual Download Page 76

Page: 76 / 252

3-1 Keys and Doors

Slide Door

Locking / unlocking with interior lock button

Locking: Slide the lock button forward.

Unlocking: Slide the lock button backward.

When the lock button is in the locked position,
closing the slide door will lock the slide door. Do not
leave the key in the vehicle.

Opening and closing with door handles



Opening:

. Pull up the door handle;

. Slide the

door backward.



Open the door completely to lock it so that it
cannot close automatically.



Closing: Slide the door forward.



Check whether the slide door is closed properly
after it is closed.

Summary of Contents for BYD5030XXYBEV2





























































































































































































































































Search results

Summary of Contents for BYD5030XXYBEV2

Reviews:

Related manuals for BYD5030XXYBEV2

Brands by name

Popular brands

BYD BYD5030XXYBEV2, Manual

Search results

Summary of Contents for BYD5030XXYBEV2

Reviews:

Related manuals for BYD5030XXYBEV2

Brands by name

Popular brands