BYD BYD5030XXYBEV2 Manual Download Page 146

Page: 146 / 252

146

5-2 Multimedia (If Any)

System Startup

Initial image

When the power is in OK mode, the initial
image will be displayed for several seconds
and the multimedia system will start to work.

Precautions

WARNING

The multimedia enters a warning interface if EPB is released for the first time after system
starting and the following prompt pops up:



By tapping

on this interface, all

functions can be fulfilled normally in the
driving status. In addition, this prompt
message will not pop up when the EPB
is released again.



on the interface is not tapped,

the system will automatically exit the
warning interface after 5s and enter the
multimedia system.

Summary of Contents for BYD5030XXYBEV2





























































































































































































































































Search results

Summary of Contents for BYD5030XXYBEV2

Reviews:

Related manuals for BYD5030XXYBEV2

Brands by name

Popular brands

BYD BYD5030XXYBEV2, Manual

Search results

Summary of Contents for BYD5030XXYBEV2

Reviews:

Related manuals for BYD5030XXYBEV2

Brands by name

Popular brands