BYD BYD5030XXYBEV2, Manual

Page: 162 / 252

162 5-2 Multimedia (If Any)
Bluetooth connect

The on-board multimedia system can only be connected with one mobile phone at the
same time.

With mobile phone connection, tap the device connected, such as , and a
confirmation interface for disconnecting the device will pop up. The device can be
disconnected by tapping "OK".

Without mobile phone connection, tap and hold a mobile phone name, and a
confirmation interface for deleting the device will pop up. The mobile phone name can
be deleted from the record list by tapping "Delete".
Bluetooth settings
Tap on the phone interface to enter the Bluetooth settings interface.

Tap A to enter the device name modification
interface. A device name can only consist of
figures or letters, with its number of characters
being 1-10.

Tap B to enter the passcode modification
interface. The passcode must consist of 4 figures.

By tapping C , the gray bar will become green,
indicating that the automatic connection function
has been activated. When the automatic
connection function is activated, the multimedia
system will detect the device connected last time after each system starting. If a
device is detected, connection will be made automatically between the device and the
system. By tapping
C again, the green bar will become gray, indicating that the
automatic connection function has been deactivated.

By tapping D , the gray bar will become green, indicating that the automatic response
function has been activated. When the automatic answer function is activated, the
system will automatically answer the incoming call if no manual response is made
after 10s.