18/36
2021/03 - Version: B Code : 37371
HOTLINE
WOODEN POOLS
BWT myPOOL
POOL’N BOX
5.3
Installation of the box reinforcements
Figure 10 – Position of the reinforcements in the box
On the last row of wooden slats, fasten 4 reinforcements in position using 2 countersunk torx screw 5x80
A4 SS torx threaded over 50 mm from bag H at each en, that is a total of 16 screws, at the positions
indicated in
Figure 10
.
5.4
Mounting the finishing trim on the supporting braces
Put the supporting brace finishing trims in position. They should be flush with the top of the pool wall.
Working from the inside of the pool, insert screws as shown in
Figure 11
using 3 countersunk screws
5 × 80 A4 SS torx, threaded over 50mm (bag H) per half trim, that is a total of 12 screws. The 2 half trims
do not meet, the metallic brace will remain visible.
