44/48
2019/01 - Indice de révision : A - Code : 97160421
WOODEN POOLS
BWT
myPOOL
HOTLINE
The following problems, associated with inappropriate use of the filtration components, are not
covered under the terms of this guarantee
:
Article
Subject and scope of the
guarantee
Term of the guarantee as
of the date or purchase
Conditions governing
acceptance of a claim
Pool fittings
Leaktightness and durability
of the pool fittings
10 years
connection
components
Leaktightness of the filter
tank
Leaktightness of the pre-
assembled connection
elements (rigid descending
pipes)
5 years on the filter tank
The hydraulic installation,
and notably the pump,
should generate an operating
pressure less than 1.2 bar.
Regular back washes to
clean the filter to avoid
clogging of the filter medium.
Pump
Motor operation
Operation and leaktightness
of the hydraulic
components.
2 years
See below + regular cleaning
of the pre-filter
Leaks caused by running the filter at an operating pressure greater than 1.2 bar (use of a pump that is
too powerful, clogged filter medium, etc.), or installing the filter above the water level without a vent and
check valve. (see the installation instructions)
“stress-cracking” of ABS parts (valve, nuts) caused by surface reactants found in some types of grease:
grease should not be used on these types of components.
The continuous expulsion of sand if sand with a grain size of less than 0.6 mm is used (the sand
supplied has the correct grain size)..
The following problems, associated with inappropriate use of the pump, are not covered under the
terms of this guarantee:
•
Running the pump “dry” (absence of water, clogging of the pre-filter)
•
Running the pump without the pre-filter
Article
Subject and scope of the
guarantee
Term of the guarantee as
of the date or purchase
Conditions governing
acceptance of a claim
Summer
cover
Integrity of the accessory
2 years
TIP ! While the cover is not deployed over the surface of the pool, it should be dried and stored away
from direct sunlight.
