BWT 3 x 3, Installation And Operating Intructions

Page: 18 / 48

18/48
2019/01 - Indice de révision : A - Code : 97160421
WOODEN POOLS BWT myPOOL
HOTLINE
10. MOUNTING THE COPING SUPPORT BRACKETS
Chamfer the edge of the central holes in the support bracket plates so that they can be correctly screwed
into position.
Make sure that the plates are level to facilitate subsequent laying of the coping.
Mount the coping support brackets, on every side, except from the side housing the skimmers(s), position
a bracket midway between each two posts as shown in the following illustrations ( Figure 22 ). For the
position of the brackets across the width housing the skimmer(s), refer to the diagrams ( Figure 22 ).
Use the 5x100 SS screws from bag L to fix them in position. The brackets should be positioned 3 mm
below the top of the wall (fig19) so that the support bracket plates will be flush with the top of the wall when
installed. PBefore screwing the plates into position, lightly mill the central holes through which the screws
(5x40) will be inserted.
475
385
450
450
590
bassin 5x10
475
590
385
450
450
Figure 20 – pool 5 x 10
5x100
4x40
Figure 21 – Coping support brackets