37/48
2019/01 - Indice de révision : A - Code : 97160421
WOODEN POOLS
BWT
myPOOL
HOTLINE
18.
LADDERS
The wooden ladder is a safety element. Do not forget to remove it after bathing!
Apply the self-adhesive label recalling this instruction to the wall of the pool!
Figure 59 – ladder components
Figure 60 – in-pool ladder
Assemble the various parts of the stainless steel ladder referring to the installation instructions provided.
When mounting the handrails, do not forget the two rubber seals that will be used to hold the decorative
escutcheon plates in position.
Position the ladder in the pool on the coping module of your choice (but not against the wall holding the
skimmer or counter swim module if installed), remember that it should be opposite the wooden ladder.
Adjust the position of the ladder paying particular attention to ensure that it is vertical and that the bumpers
are pressed firmly against the inside wall.
Mark the positions for drilling. Remove the ladder and drill.
Fix the ladder in place according to the instructions provided, the counter plate should be positioned under
the coping (additional bag in the Filtration pack). Tighten moderately.
Slide the 2 rubber seals along the tubes so that they hold the escutcheon plates in position.
Figure 61 – Assemble the wooden ladder
Figure 62 – Hook beneath the coping
Assemble the wooden ladder as illustrated, use screws from bag (K)
The wooden ladder is held in place by hooks attached under the coping and a lever mechanism attached
to the saddle of the ladder. The fastening mechanism may differ from that illustrated but will function
according to the same principle.
Figure 63 – Levier
Figure 64 –
échelle