32/48
2019/01 - Indice de révision : A - Code : 97160421
WOODEN POOLS
BWT
myPOOL
HOTLINE
Tip: Use silicon grease or soapy water to faciliate fitting of the pipes.
aspiration
refoulement
1
3
3
2
4
POOL 3m wide
1 = r
eturn fitting, length
= +/- 3.6 m
2 =
Y return fitting
length = +/- 0.7 m x2
3 = skimmer length = +/- 2.9 m x2
4 = p
ump filter, length
= +/- 0.7 m
POOL 4m wide
1 = re
turn fitting, lengt
h = +/- 3.1 m
2 = Y r
eturn fitting, length
= +/- 1.4 m x2
3 = skimme
r, length
= +/- 3.1 m x2
4 =
pump filter,
length = +/- 0.7 m
NOTE:
The 3 x 3 pool model is fitted with only one skimmer and
one return fitting, therefore the pump outlet manifold only
has one port. Hence, there is no Y union installed on the
return pipe
WEVA
Figure 46 –
Example, filtration with two skimmers - Weva
Before connecting the pipes, make sure that the protective rubber bands intended to cover the Torro
clamps (connection skin pack) after tightening are in position at both ends.
For models with a single skimmer and a single return fitting, use the 4m ring without cutting it. .
Fig.1
POOL 3x6
1 = refoulement longueur = +/- 14.1 m
2 = refoulement Y longueur = +/- 0.7 m x2
3 = skimmer, length = +/- 2.9 m x2
4 = Vacuum point, length = +/- 6.6 m
POOL 4x8
1 = refoulement longueur = +/- 17.2 m
2 = refoulement Y longueur = +/- 1.4 m x2
3 = skimmer, length = +/- 3.1 m x2
4 = Vacuum point, length = +/- 6.8 m
ODYSSEA model
1
3
3
4
2
2
Figure 47 – Odyssea model
Check that all the valves are in their closed positions and continue filling the pool until the water level is
2/3 of the way up the skimmer.
Once all the connections have been made, make the cut-outs in the liner.