Butler CAPTURE 4 Page 7 Instruction Manual Download | Manualshive

Page: 7 / 105

background image

INSTRUCTION, USE AND

MAINTENANCE MANUAL

GB

Page 7 of 67

SOME OF THE PICTURES AND/

OR DISPLAY SCREEN PAGES

PRESENT IN THIS MANUAL HAVE

BEEN OBTAINED FROM PICTURES

OF PROTOTYPES, THEREFORE

THE STANDARD PRODUCTION MA-

CHINES AND ACCESSORIES CAN

BE DIFFERENT IN SOME COMPO-

NENTS/DISPLAY SCREEN PAGES.

1.0 GENERAL INTRODUCTION

This manual is an integral part of the product and

must be retained for the whole operating life of the

machine.

Carefully study the warnings and instructions con-
tained in this manual. It contains important instruc-
tions regarding

FUNCTIONING, SAFE USE and

MAINTENANCE.

KEEP THE MANUAL IN A KNOWN,

EASILY ACCESSIBLE PLACE FOR

ALL ACCESSORY OPERATORS

TO CONSULT IT WHENEVER IN

DOUBT.

THE MANUFACTURER DISCLAIMS

ALL RESPONSIBILITY FOR ANY

DAMAGE OCCURRED WHEN THE

INDICATIONS GIVEN IN THIS

MANUAL ARE NOT RESPECTED:

AS A MATTER OF FACT, THE NON-

COMPLIANCE WITH SUCH INDI-

CATIONS MIGHT LEAD TO EVEN

SERIOUS DANGERS.

1.1 Introduction

Thank you for preferring this tyre-changer. We feel sure
you will not regret your decision.
This machine has been designed for use in professional
workshops and stands out for its reliability and easy,
safe and rapid operation: with a minimum mainte-
nance and care this tyre changer will operate for many
years without problems, thus satisfying Your needs.

2.0 INTENDED USE

The machines described in this manual and their
different  versions,  are  tyre-changers  for  car  tires
and light transport projected to be used exclusively
for  the  mounting,  demounting,  and  inflation  of
wheels  with  dimensions  of  max.  diameter  of  54"
and max. width of 15".

THIS MACHINE MUST BE USED

STRICTLY FOR THE INTENDED

PURPOSE IT WAS DESIGNED FOR

(AS INDICATED IN THIS MANUAL).

ANY OTHER USE WILL BE CON-

SIDERED IMPROPER USE. IN

PARTICULAR BEAD FITTING AND

INFLATING MUST BE CARRIED

OUT IN A SPECIALLY APPROVED

INFLATION CAGE.

THE MANUFACTURER CANNOT

BE HELD RESPONSIBLE FOR ANY

DAMAGE CAUSED BY IMPROPER,

ERRONEOUS, OR UNACCEPTABLE

USE.

THIS MACHINE HAS BEEN DE-

SIGNED FOR AN ORDINARY EM-

PLOYMENT IN INDUSTRIAL ENVI-

RONMENT.

THEREFORE, A PERSISTENT AND

CONTINUOUS USE IS NOT RECOM-

MENDED.

2.1

Training of personnel

The machine may be operated only by suitably

trained and authorized personnel.

Given the complexity of the operations necessary to
manage the machine and to carry out the operations
safely and efficiently, the personnel must be trained
in such a way that they learn all the information
necessary to operate the machine as intended by the
manufacturer.

A CAREFUL READING OF THIS

INSTRUCTION MANUAL FOR

USE AND MAINTENANCE AND A

SHORT PERIOD OF TRAINING

WITH SKILLED PERSONNEL CAN

BE AN ENOUGH PREVENTIVE

PREPARATION.

CAPTURE 4 - CAPTURE 4 FI

7104-M007-4_B

«
...
5
6
7
8
9
...
»

Summary of Contents for CAPTURE 4










































































































Reviews:

No comments

Related manuals for CAPTURE 4

Brand: Ken-Tool Pages: 2

Brand: Mondolfo Ferro Pages: 552

Brand: ZIPPER MASCHINEN Pages: 69

Strong-Arm CMTC1

Brand: Clarke Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands