INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 12 of 67
8.3
Assembly procedures
1. Assemble “Tubeless inflation” unit to the machine
keeping to the following instructions:
- fix the tank (
Fig. 7 ref. 6
) to the support flange
(
Fig. 7 ref. 7
) using the screws (
Fig. 7 ref. 4
) and
nuts (
Fig. 7 ref. 5
) equipped on issue;
- fix the flange (
Fig. 7 ref. 7
) to the machine (
Fig. 7
ref. 3
) using the screws (
Fig. 7 ref. 1
) and nuts
(
Fig. 7 ref. 2
) equipped on issue;
Fig. 7
2. Connect the black pipe (
Fig. 8 ref. 1
) and the blue
pipe (
Fig. 8 ref. 2
) on the provided quick couplings
as shown in figure
Fig. 8
.
Fig. 8
IN CASE OF A CHANCE SUP-
PLY FAILURE, AND/OR BEFORE
ANY PNEUMATIC CONNECTIONS,
MOVE THE CONTROLS TO THE
NEUTRAL POSITION.
CAPTURE 4 - CAPTURE 4 FI
7104-M007-4_B
8.2
Fixtures contained in the packing
The packing case contains also the fixtures box.
Check that all the parts listed are there.
Code
Description
N.
B1157000
Two-faced cone
1
710013421
Reverse wheels protection
1
G1000A124
Bead depressing 28" with en-
trainer
1
G1000A152
D.14 pin light truck flange
1
Each machine is supplied with an activation kit
(
WARNING: DO NOT THROW AWAY!
) in a sepa-
rated box near the monitor; the kit consists of:
- SMART CARD (
ref. 1
) with serial number
(
WARNING: DO NOT THROW AWAY!
);
- USB (
ref. 2
) marked with the same serial num-
ber and containing the machine PC installation
files. The card can be used for backup procedure
(save) and for PC data restore.
1
2
CAREFULLY KEEP THIS MATE-
RIAL AS IT WON'T BE SUPPLIED
AGAIN AS A SPARE PART.
THE MANUFACTURER DENIES LI-
ABILITY FOR THE LOSS OF THE
SMART CARD AND/OR USB KEY.
