INSTRUCTION, USE AND
MAINTENANCE MANUAL
Page 36 of 111
GB
AIKIDO.34LIGHT-AIKIDO.34LIGHTFI
7101-M001-0_B
12.2.1 Chuck height adjustment
The chuck with central locking has 3 different height
mode. A “quick release” system allows to remove the
chuck mobile part and dowel the support plate at the
required height.
The adjustment through the sliding shaft is possible
following three phases as indicated on the enclosed
photo:
1- Lift the flange as the arrows indicated (
Fig. 24 pos.
1
).
2 - In the same time release and lift the wheel support
as the arrows indicated (
Fig. 24 pos. 2
).
12.2.2 Reverse wheel pan protection
In case of use of reverse wheels, to protect the rim, ap-
ply on the rubber platform a protection made to a trans-
parent plastic material available on demand (
Fig. 25
pos. 1
). We suggest you a constant replacement of it and
in any case if there are visible damages (see
Fig. 25
).
6. Lifting the shaft (
Fig. 22 pos. 1
) through the proper
handle (
Fig. 22 pos. 2
), turn the ring nut (
Fig. 22
pos. 3
) until the complete cone clamping (
Fig. 22 pos.
4
) on the wheel (
Fig. 22 pos. 5
).
7. For wheels with alloy rims, use a proper plastic guard
(
Fig. 23 pos. 1
).
To release the wheel, carry out the previously operations
on the contrary way.
3 - Check that the flange return into the coupler posi-
tion.
Now it’s possible to place the tyre in the right way with
the working tools.
Fig. 23
Fig. 25
1
Fig. 24
1
1
2
2
Fig. 22
