March 2011
Page
26
of
30
(5) Show User configuration:
Type 5<
CR
>
Shows the User number, User Name, Ports Assigned, Dial Back
Number & dial Out Authority
Press <
CR
> to go back to the manage Users menu
Dial Out and Answer call function
The (
D
) Dial out and (
N
) aNswer call features provide better utilisation of dial lines and greater
dial security functions.
The dial out and Answer Call functions enables network operations to dial out via the Cisco
Aux port (Reverse telnet) or a direct PC serial Connection to the TERM port of the FF06-6P.
A Pushkablue can be used to dial either another Pushkablue device or any other modem
device.
There are two specific Pushkablue dial out security functions that are used
1) The Dialling out Pushkablue will automatically broadcast the Secure User ID Key (10 to 20
Digits) to the receiving Pushkablue.
2) Enables the network operator to accept a call back from a remote dial back Pushkablue or
modem device.
How to make a dial out call (Via Term Port)
This instruction assumes you have logged onto the Pushkablue device via the TCP/IP Network.
From the main Menu Type: D<
CR
>
This line will appear:
Is there an ID key (y/n)?
If the Remote Pushkablue device has its Secure User ID Key enabled, type: Y<
CR
>
If the Remote Pushkablue device does
NOT
have a Secure User ID Key enabled or you are dialling another type of Modem device type: N<
CR
> or
<
CR
> (
Please skip until you see, Enter Number to Dial (5-16 digits:
)
If “Y” the next line will appear:
Enter Security Key :<
Enter the 10-20 Digit ID key that is configured in the Remote Pushkablue Device
><
CR
>
This next line will appear:
Enter Number to Dial (5 - 16 digits) :<
enter the telephone number of the remote Pushkablue device
><
CR
>
(
Please note: if you are using a telephone line that needs a 9 or 8 to get a dial line out add a comma (,) after the 9 or 8 to enable the Pushkablue device
to pause before dialling the telephone number
)
You will see: Dialling… (Please wait up to 1 minute for connection to remote end)
If the Secure user ID Key is incorrect or the Pushkablue does not have its Secure ID Key enabled you will see:
ID key is incorrect
.
If the Secure User ID key is correct you will see:
Connected (Press (Numpad) +++ to Disconnect call)
Login :<
this is where you insert your user name and passwords to log on
>