BushkaBlue FF06-6P, User Manual, Page: 14 / 30

March 2011 Page 14 of 30
Changing Prompt Name
(Please note: < CR > = Enter)
Abbreviated
Command
Admin 1 Admin 2
Parameters/Values
Description
PR=
1-32 Characters
(including spaces)
Changes the Pushkablue Prompt name
( Default: OK)
Example:
pr=Pushkablue-New York
Prompt name would now show: Pushkablue-New York:
Changing Console Port and Power Port Names
Abbreviated
Command
Admin 1 Admin 2
Parameters/Values Description
C n N=
1 to 32 Characters
(including Spaces)
Changes Console Port n Name ( n = 1 to 6)
Where n is the Console port number:
Example: C 1 N=Cisco 2610-01
Console Port 1 name would now show: Cisco 2610-01
P nn N=
1 to 32 Characters
(including Spaces)
Changes Power Port nn Name ( nn =A1, A2, A3, B1, B2, B3)
Where nn is the Power port number:
Example: P A1 N=Cisco 2610-01 Power
Power Port A1 name would now show: Cisco 2610-01 Power
Split Administrator Gift Commands
The Split Administrator function allows 2 separate departments of organizations share the same Out of Band device and telephone line, but each
department cannot control or gain access to each other’s console or power ports.
ACP=
1;2;3;4;5;6
Allocates Console Ports to other Administrator
(
Default: Not Active, until invoked by Admin 1)
Example: If logged in as Admin 1: acp=4;5;6< CR >
Console Port s 4,5 & 6, is now Gifte d to Administrator 2
APP=
A1, A2,A3 & B1, B2, B3
Allocates Power Ports to other Administrator
(
Default: Not Active, until invoked by Admin 1)
Example: If logged in as Admin 1: app=B1< CR >
Power Port B1, is now Gifted to Administrator 2
Admin 1 has to
Gift console and power ports to Admin 2. Once this has been instigated, Admin 1 loses control and access to these ports.
Admin 2 can however;
Gift console and power ports back to Admin 1 also. The abbreviated commands are the same for each Administrator.
From a factory default status, Admin 1 can also change the default Admin 2 name (default:
SysAdmin002 ) and
Passwords (Default: Pushkablue , DoNotKnow ). But This Can ONLY be done ONCE .
If logged in as Admin 2, you can change the Admin 2 Name and Passwords independently from Admin1.
The commands to
Gift console ports and Power ports are the same for both Admin 1 and Admin 2, they are:
To Gift Console Ports, type: acp=
n < CR >
( n = Console port Number)
If you are Gifting more than one console port, place a semi-colon (;) between the numbers, example: acp=1;2;3<
CR >
To Gift Power Ports, type: app=
nn < CR >
( nn = Power Port Number A1 A2 A3 or B1 B2 B3)
Please Note : If you are Gifting more than one Power Port, place a semi-colon (;) between the numbers, example: app=A1;B1< CR >
Once this has been done, hit<
CR > 3 times quickly to refresh the Main Menu, you should see the console and
Power ports Gifted have gone from the Main Menu.