March 2011
Page
17
of
30
(1) – Set Comms Options
This section is dealt with later in this document but covers the following subjects (
Page 23
):
(1) - Set Inactivity Timeout
(2) - Set Disconnect Character
(3) - Set PB Flow Control
(4) - Set Login Prompt Display
(5) - Set Dialling Type
(6) - Line Modulation Speeds
(7) - Set Number of Dial In Rings
(3)- Set Port Names
You may wish to change the FF06-6P console port (1 to 6) names, so operators can identify the correct console device.
From the Main Menu , choose Pushkablue Setup Options, then
Choose
3
Set Port names.
(Example F<
CR
>, then 3<
CR
>)
You will be asked to choose a port number
Select Port 1 2 3 4 5 6 A1 A2 A3 B1 B2 B3:
So if you wish to change console 1 to another name such as Cisco-2800-01
Type: 1<
CR
>
Current Port Label : Console
Change (y/n)?
Type:Y<
CR
>
Next you will be asked to input the console port name (Spaces are allowed) 1-32 Characters.
Enter Port Label (Up to 32 Characters) :<
New Port Name
><
CR
>
When you go back to the Main Menu, you should now see the Console port name has been changed.
(4) – Set System Time and Date
To Change the System Time and Date
From the Main Menu , choose Pushkablue Setup Options, then
Choose
4
Set System Time and Date
(Example F<
CR
>, then 4<
CR
>)
You will be given a prompt:
Current time is 01Jan1980 02:32:11
Change (y/n)?
Type: Y<
CR
>
You will receive another prompt:
Enter Date (dd/mm/yy):
The date is set DD/MM/YY, example: 31/12/08,
So Type: DD/MM/YY<
CR
>
Another prompt for the time will appear: Enter Time (hh:mm:ss):
The Time is set HH:MM:SS, example: 23:10:00
So Type: HH:MM:SS<
CR
>
You will then be sent back to the Pushkablue setup Options menu.
