March 2011
Page
16
of
30
FF06-6P Configuration Using Menus
(F) - FastFix Set Up Options
This section covers the (F)-FastFix Setup Options. To access the Pushkablue setup options:
From the Main Menu type: F<
CR
>
FF06-6P main Menu
Previous User Login : <no one>
(1) - Console
(2) - Console
(3) - Console
(4) - Console
(5) - Console
(6) - Console
(A1) - Power Control Module
(A2) - Power Control Module
(A3) - Power Control Module
(B1) - Power Control Module
(B2) - Power Control Module
(B3) - Power Control Module
(G) - Group Reboot
(I) - Information
(C) - Input A/B Current Status
(L) - Logout
(V) - View Log File
(D) - Dial Out
(N) - aNswer Call
(F) - FastFix Setup Options
(M) - Manage Users
Ok :
We will explain each option from the top down.
(B) - Send Break Signal (For Cisco Appliances)
The Send Break Signal function is designed to send a break sequence
ONLY
to a Cisco console port locally. This is used when a remote network
operator wishes to invoke Rommon Reboot on the Remote Cisco device.
(
Please note, the Cisco device has to be powered down and back on again by a local person
).
To send a break sequence, type B<
CR
>
OK: Available Ports
1 Cisco Console-01
2 Cisco Console-02
3 Cisco Console-03
4 Cisco Console-04
5 Cisco Console-05
6 Cisco Console-06
Select Port or <
CR
> alone to quit :
Choose port 1 to 6<
CR
> depending which port you wish to send the break signal to??
Once the break signal has been sent, you will see:
“Sending Break”
You will have been returned to the Pushkablue Setup Options main menu