March 2011
Page
23
of
30
Set Comms Options
This section explains the operations of the various Comms options available.
From the Main Menu, choose F<
CR
> (Pushkablue set Up Options)
Then Choose 1<
CR
> Set Comms Options
This menu will appear:
(1) - Set Inactivity Timeout
(2) - Set Disconnect Character
(3) - PB Flow Control Enable/Disable
(4) - Set Login Prompt Display
(5) - Set Dialing Type
(6) - Line Modulation Speeds
(7) - Set Number of Dial In Rings
(8) - Set FF06S Slave Configuration
(X, <CR>) - Back to Previous Menu
Ok :
We will explain each option from the top down.
1) Set Inactivity Timeout
This feature will disconnect the modem from a call when it does not see active data after the given time set.
To set Inactivity timeout (Default 5 minutes)
Type 1<
CR
>
Current inactivity Timeout: 5
Change (Y/N)? will appear.
Type<Y><
CR
> if you wish to change the time in minutes (1-99 or 0 for disable)
or <
CR
> if you do not wish to change it.
(2) - Set Disconnect Character
This feature enables you to change the serial port (1-3) disconnect character. So when you
have a port connection and you wish to disconnect and go back to the Main Pushkablue menu, Type the character
3 times in a row.
The factory default is CTRL-X. (Hold the <CTRL> key down and type
X
3 times).
To set Disconnect Character (Default CTRL-X)
Type 2<
CR
>
Current disconnect character: Ctrl-x
Change (Y/N)?
Type Y<
CR
>
Enter Disconnect character: X<
CR
> (X = the disconnect character you have chosen, Case sensitive)
You will then be returned to the Comms options menu.
It is important to remember that the disconnect character you have chosen will be displayed once you connect to a por
t.
You must type that character 3 times to achieve disconnect from that port.
