![background image](http://html1.mh-extra.com/html/bush-hog/12814/12814_operators-manual_2834782102.webp)
ASSEMBLY
2814-2820
08/20 Assembly Section 3-8
© 2020 Alamo Group Inc.
ASSEMBL
Y
DRIVELINE ATTACHMENT TO IMPLEMENT
CV DRIVELINE
1.
Secure the opposite end to the power divider
gearbox using the tapered pin and locknut.
Tighten nut to 30 ft. lbs.
2.
Install driveline with the CV body attaching to
the tractor PTO.
3.
Pull on each driveline section to make certain it
is securely attached.
4.
Do not chain the CVF Bell Shield or driveline
shield chains to keep shields from turning.
Shielding should be allowed to turn with
driveshaft.
CENTER DRIVELINE
NOTE:
The center driveline is assembled too the unit at the factory and these instructions are for re-
installation, should it be removed for repair. Follow reverse order for driveline removal.
1.
Slide the center driveline clutch onto the center gearbox input shaft until it bottoms out against casting.
Slide yoke assembly onto transfer gearbox output shaft until it bottoms out against casting. Place stub
shaft between yokes, then slide clutch and yoke assembly until tapered pins can be installed to retain.
Tighten taper pins retaining nut to 30 ft. lbs. Install one roll pin through yoke and stub shaft.
Summary of Contents for 12814
