MM3156A DRUM SANDER
１０
Height Adjustment Handle Assembly
Figure 5
4. Secure the assembled Wide drum Sander to the accessory workstand or to
an adequately stable workbench or stand before operating the machine.
WARNING:
To prevent possible serious personal injury, always disconnect the
W ide Drum Sander from the power source before servicing the unit or
changing the abrasive strips.
WARNING:
For your own safety, never connect the plug to a source outlet
until you have read and understand the safety and operating instructions for
your Wide Drum Sander.
WARNING:
Make certain that the switch is in the OFF position before inserting
the plug into a power source. Do not connect the power until you are ready to
operate the machine. Be sure that the bolts are firmly tightened before
connecting to power source.
CAUTION:
The surface to which the Wide Drum Sander is mounted must not
be warped or uneven. Mounting the base to a warped suface will cause
distortion and poor operation.
ADJUSTMENTS
Your Wide Drum Sander was aligned and completely adjusted during assembly.
