MM3156A DRUM SANDER
８
Figure 1
Figure 2
ASSEMBLY
After unpacking your WDS Wide Drum Sander and checking the Loose Parts List for
missing components, you are ready to assemble and install the Height Adjustment
Handle Assembly.
1. Screw the Height Adjustment Handle into the threaded nut in the Height Adjustment
Crank using a slotted screwdriver until snug. (See Figure 4.)
Figure 3
Conveyor
Feed Motor
Extension
Table
Elevation
Tension
Adjustment
Screws
Evevation Tension
Adjustment Screws
Feeding Conveyor
Sanding
Drum
Nip Guard
Sanding Drum
Motor
On/Off Switch and
Variable Speed Control
Box
Height Adjustment
Handle
Height Adjustment
Crank
Threaded Nut
