Burster 9180, Manual

Page: 28 / 109

Model 9180
burster
Digital Panelmeter
Page
M
A
X
M
I
N
1
HOLD
TARA
2
TARE RESET
ESC
LIMIT MAX/MIN
DATA
ENTER
3
4
M
A
X
M
I
N
1
HOLD
TARA
2
TARE RESET
ESC
LIMIT
MAX/MIN
DATA
ENTER
3
4
M
A
X
M
I
N
1
HOLD
TARA
2
TARE RESET
ESC
LIMIT
MAX/MIN
DATA
ENTER
3
4
M
A
X
M
I
N
1
HOLD
TARA
2
TARE RESET
ESC
LIMIT
MAX/MIN
DATA
ENTER
3
4
2-16
2.3.3 Thermometer Pt 100
Fig. 2.3.3a
You reach the input configuration Pt 100 from
the selection level of the module (see Fig.
2.3.1a) if you are using the device as a Pt 100
thermometer. If this is the case, press the
button until the setting in the adjacent figure
appears in the display.
ENTER
: Confirms configuration as
thermometer Pt 100 and gives you
access for measurement range
selection.
ESC
: Returns you to selection level of the
module (see Fig. 2.3.1a).
Fig. 2.3.3c
Fig. 2.3.3b
Fig. 2.3.3c
: In the main display either
°
C or
°
F
appear. Press the " " button to go
to another measurement range.
ENTER
: Confirms the selection and takes
you to the "Resolution" menu.
ESC
: Returns you to the selection level of
the input (see Fig. 2.3.3a).
: Selects either
0.1
° or
1
° resolution.
ENTER
: Confirms selection and takes you to
the next program routine.
ESC
: Returns you to input selection level
(see Fig. 2.3.3a).
Temperature offset appears in the display.
Using the buttons " " and " " the desired
value (with two digits) is programmed. Apart
from cases described on page 2-10, zero is
generally entered in this routine.
ENTER
: Confirms the entered value, quits
the program and takes you to the
input level in the programming
mode (display -Pro-).
ESC
: Returns you to the input selection
level (see Fig. 2.3.3a).