Burster 9163, Manual, Page: 141 / 162

Digital indicator Model 9163
Page 141
13. Technical specifications
Only those values, functions and ranges are guaranteed whose accuracy is specified within relative or
absolute tolerances or within specified limits.
Table 6: Technical specifications of the digital indicator
Display 1 x 5 digit, two-color red/green, character height 13 mm
1 x 2 digit, red, character height 7 mm
14 x red LEDs
Buttons 6 mechanical buttons (Peak, CAL/RST, *, UP, DOWN, F)
Accuracy 0.1 % of upper scale value ±1 scale division at an ambient
temperature of 25 °C
Temperature drift < 150 ppm/°C of upper scale value for respective inputs
/ voltage and strain gage
Main input/main inputs IN1, IN2 Strain gage sensors: 350 Ω , sensitivity 1.5...4 mV/V, with
sensor excitation 5/10 V DC ±5%
Potentiometer:
≥ 100 Ω , Ri > 10 M Ω at 2.5 V DC
DC linear: ± 60mV, ± 100mV, ± 1V, ± 5V, ± 10V, Ri > 10M Ω
0/4...20 mA, Ri = 50 Ω
TC, RTD
Sampling interval: 2 msec
Type TC (thermocouple) (ITS90) J, K, R, S, T (IEC 584-1, CEI EN 60584-1,60584-2)
Custom linearization possible (64 linearization steps)
Compensation error 0.1° / °C
Type RTD (resistance thermometer)
(ITS90) Pt100 (DIN43760),
Max. wire resistance for RTD 20 Ω
Type PTC / Type NTC 990 Ω , 25°C / 1 k Ω , 25 °C
Reliability Short-circuit and broken-sensor detection, Monitoring of
sensor excitation, LBA limit
Auxiliary inputs IN3, IN4 Potentiometer: 1...10 k Ω , at 10 Vdc
DC linear signals: 10 V, Ri > 2 M Ω
0/4...20 mA, Ri = 50 Ω
Sampling interval: 10 msec
Linear scale values -19 999...99 999, configurable decimal point
Limit outputs with relay
OUT 1, OUT 2, OUT 3, OUT 4 NO (NC) 5A, 250 V / 30 V DC
Limit outputs with transistor
OUT 1, OUT 2, OUT 3, OUT 4 24 Vdc, > 18 V at 20 mA
Ru = 390
Ω