Cleaning the Unit
3-16
4326 9562-007
3. Wipe any ink that may be present off the cartridge contacts inside the cartridge
housing.
4. Wipe any ink that may be present off the window inside the cartridge housing.
5.
Dampen
a
clean, lint-free cloth
with a small amount of water.
Note:
The cloth should not be too wet, as water must not drip or remain on the unit.
Caution
Do not use alcohol to wipe the cartridge nozzles.
This will cause damage.
Do not use the Image Glass Cleaning Pads
from Burroughs
(75-1804-907) to wipe the cartridge nozzles. These pads are pre-saturated
with isopropyl alcohol that will cause damage to the cartridge.
6. Hold the cloth gently against the cartridge nozzles for three seconds. Then, wipe the
nozzles in one direction only,
UP
, as shown here.
Summary of Contents for smartsource series
