9
Basic safety information
Type 8746 Profibus, 8746 Analogue
Various dangerous situations.
To avoid personal injury, obey the following instructions:
▶
Do not operate the product without its mesh filter.
▶
Only operate the product in the installation position that is
given on the calibration plate.
▶
Make sure that the operating pressure of the MFM is not
higher than the maximum calibration pressure that is given
on the calibration plate.
▶
Make sure that the operating pressure of the MFC is not
higher than the tight sealing pressure of the control valve.
▶
Only use the product for the fluid specified as the operating
fluid in the calibration protocol.
▶
Only use agents that are stable with the product materials for
cleaning and decontamination
Find the compatibility chart on our homepage:
In the event of any ambiguity please contact your local sales
office.
▶
Do not make any modifications to the product and do not
subject the product to mechanical stress.
▶
Protect the installation and the product from accidental
actuation.
▶
Only trained personnel may perform the installation work and
the maintenance work.
▶
After an interruption in the electrical supply or in the fluid
supply, ensure a controlled restart of the process.
▶
Observe best industry practice.
NOTICE
components or assemblies at risk from electrostatic
charges.
The product contains electronic components which are suscep
-
tible to electrostatic discharge (ESD). Contact with electrostati
-
cally charged persons or objects endangers these components.
In the worst case, they will become defective immediately or will
fail when energised.
•
To minimise or even avoid any damage caused by an elec
-
trostatic discharge, take all the precautions described in the
EN 61340-5-1.
•
Do not touch any of the live electrical components.
English
Summary of Contents for 8746
Page 59: ......
Page 60: ...www burkert com...
